Otori Dam

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Otori Dam
File:Otori Dam survey 1976.jpg
The dam in 1976
Otori Dam is located in Japan
Otori Dam
Location of Otori Dam in Japan
Country Japan
Location Tadami
Coordinates Lua error in package.lua at line 80: module 'strict' not found.
Status Operational
Construction began 1961
Opening date 1963
Owner(s) Electric Power Development Company
Dam and spillways
Type of dam Arch-gravity
Impounds Tadami River
Height 83 m (272 ft)
Length 188 m (617 ft)
Reservoir
Total capacity 15,800,000 m3 (12,809 acre·ft)
Active capacity 5,000,000 m3 (4,054 acre·ft)
Catchment area 656.9 km2 (254 sq mi)
Surface area 89 ha (220 acres)[1]
Power station
Commission date 1963, 2003
Hydraulic head Unit 1: 50.8 m (167 ft)
Unit 2: 48.1 m (158 ft)
Turbines 1 x 95 MW, 1 x 87 MW Kaplan-type
Installed capacity 182 MW

The Otori Dam (大鳥ダム Ōtori damu?) is a concrete arch-gravity dam on the Tadami River, 17 km (11 mi) southwest of Tadami in Fukushima Prefecture, Japan. The primary purpose of the dam is hydroelectric power generation and it supports a 182 MW power station. The power station contains two Kaplan turbine-generators. Unit 1 (95 MW) was commissioned on 20 November 1963 while Unit 2 (87 MW) was commissioned on 7 June 2003 as part of a power plant expansion project that included an additional 200 MW generator at Okutadami Dam upstream. The dam is 83 m (272 ft) tall and 188 m (617 ft) long. Its reservoir has a 15,800,000 m3 (12,809 acre·ft) capacity of which 5,000,000 m3 (4,054 acre·ft) is active (or "useful") for power generation. The reservoir has a catchment area of 656.9 km2 (254 sq mi) and surface area of 89 ha (220 acres). Of the two generators, Unit 1 has a maximum effective hydraulic head of 50.8 m (167 ft) and Unit 2 is afforded 48.1 m (158 ft). The design flood discharge of the dam is 2,200 m3/s (77,692 cu ft/s) and its service spillway is controlled by three tainter gates.[2]

See also

References

  1. Lua error in package.lua at line 80: module 'strict' not found.
  2. Lua error in package.lua at line 80: module 'strict' not found.