Argyle station (CTA)

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Argyle
File:Argylectaredline.jpg
Location 1118 West Argyle Street
Chicago, Illinois 60640
Coordinates Lua error in package.lua at line 80: module 'strict' not found.
Owned by Chicago Transit Authority
Line(s) Lua error in package.lua at line 80: module 'strict' not found.
Platforms 1 Island platform
Tracks 4
Construction
Structure type Embankment
History
Opened Chicago & Evanston Railroad:
May 21, 1885
Northwestern Elevated Railroad:
May 16, 1908
Rebuilt 1921, 2012
Previous names Argyle Park
Traffic
Passengers (2015) 1,078,620[1]Decrease 0.1% (CTA)
Rank 68 out of 143[lower-alpha 1]
Services
Preceding station   Chicago "L"   Following station
toward Howard
Red Line
Route map
Purple Line Express
north to Linden
Red Line
north to Howard
Argyle St.
Purple Line Express
south to Loop
Red Line
south to 95th/Dan Ryan

Argyle is a station on the Chicago Transit Authority's 'L' system. It is situated between the Berwyn and Lawrence stations on the Red Line, which runs from Rogers Park at Chicago's northern city limits, through downtown Chicago, to Roseland. It is an elevated station with a single island platform located at 1118 West Argyle Street in the West Argyle Street Historic District of Chicago's Uptown community area.

Location

Argyle is situated on W. Argyle Street, close to the intersection with Broadway. The station is located in the West Argyle Street Historic District in the Uptown community area of Chicago; the area surrounding the station consists of a mixture commercial and residential areas,[2] and is particularly noted for the high concentration of Vietnamese restaurants, bakeries and shops; as well as Chinese, Cambodian, Laotian and Thai businesses.[3]

History

The new embankment at Argyle Station in 1916

The site of Argyle station was first used as depot called Argyle Park on the Chicago and Evanston branch of the Chicago, Milwaukee & St. Paul Railroad route, which opened on May 21, 1885.[4] On opening, the station houses along the route were described as "attractive frame structures built in the Gothic and Queen Anne styles."[4] In 1908 the Northwestern Elevated Railroad was extended north from Wilson, using the tracks of the Chicago, Milwaukee & St. Paul Railroad, and a new station was constructed on the site of the previous depot.[5][6] The station was again rebuilt to a design by architect Charles P. Rawson when the tracks between Wilson and Howard were elevated onto an embankment between 1914 and 1922.[7] In 1979 the station received a $250,000 facelift,[8] and in 1991 a Chinese-style hipped-and-gabled roof was added to the platform canopy.[9] The station was closed for renovation from August 24 to October 5, 2012.[10]

Services

Road with a railroad bridge crossing it. A train waits at a station on the bridge as passengers disembark
A northbound train at Argyle station

Argyle is part of CTA's Red Line, which runs from Howard to downtown Chicago and 95th Street. The station had an island platform on an embankment located between Broadway and Winthrop Avenue. It serves the Red Line's two tracks; the north-bound track serves trains to Howard, while the south-bound track serves trains to 95th Street. The station entrance is located on the north side of Argyle Street, built into the embankment. It is situated between the Berwyn and Lawrence stations. Red Line trains serve Argyle 24 hours a day every day; trains operate roughly every 3 to 9 minutes during rush hour and midday operation, with longer headways of up to 15 minutes at night.[11][12] The station is also located ​12 a block from the #36 Broadway bus.

Notes and references

Notes

  1. Due to possible double-counting of physically-connected stations, the CTA's official 2015 tally of stations was 146, but for ridership purposes reported having only 143 stations.

References

  1. Lua error in package.lua at line 80: module 'strict' not found.
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. 4.0 4.1 Lua error in package.lua at line 80: module 'strict' not found.
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. Lua error in package.lua at line 80: module 'strict' not found.
  7. Lua error in package.lua at line 80: module 'strict' not found.
  8. Lua error in package.lua at line 80: module 'strict' not found.
  9. Lua error in package.lua at line 80: module 'strict' not found.
  10. Lua error in package.lua at line 80: module 'strict' not found.
  11. Lua error in package.lua at line 80: module 'strict' not found.
  12. Lua error in package.lua at line 80: module 'strict' not found.

External links