Amiga video connector
From Infogalactic: the planetary knowledge core
<templatestyles src="Module:Infobox/styles.css"></templatestyles>
| Type | Analogue video connector | ||
|---|---|---|---|
| Production history | |||
| Designed | 1980s | ||
| General specifications | |||
| Video signal | Analogue RGB and Digital Red-Green-Blue-Intensity | ||
| Pins | 23 | ||
| Pin out | |||
| Male connector seen from the front [1] | |||
| Pin 1 | XCLK External Clock | ||
| Pin 2 | XCLKEN External Clock Enable | ||
| Pin 3 | RED Analog Red | ||
| Pin 4 | GREEN Analog Green | ||
| Pin 5 | BLUE Analog Blue | ||
| Pin 6 | DI Digital Intensity (47 Ohm) | ||
| Pin 7 | DB Digital Blue (47 Ohm) | ||
| Pin 8 | DG Digital Green (47 Ohm) | ||
| Pin 9 | DR Digital Red (47 Ohm) | ||
| Pin 10 | CSYNC Composite Sync | ||
| Pin 11 | HSYNC Horizontal Sync (47 Ohm) | ||
| Pin 12 | VSYNC Vertical Sync (47 Ohm) | ||
| Pin 13 | GNDRTN Return for XCLKEN | ||
| Pin 14 | ZD Zero Detect (47 Ohm) | ||
| Pin 15 | C1 Clock Out | ||
| Pin 16 | GND | ||
| Pin 17 | GND | ||
| Pin 18 | GND | ||
| Pin 19 | GND | ||
| Pin 20 | GND | ||
| Pin 21 | -12 Volt DC (50 mA) | ||
| Pin 22 | +12 Volt DC (100 mA) | ||
| Pin 23 | +5 Volt DC (100 mA) | ||
The Amiga video connector is used on all Commodore Amiga computers. The 23-pin D-subminiature has signals for genlocking, RGB analog video (4096 colours), and a digital Red-Green-Blue-Intensity signal (16 colours).
The refresh frequency is 15 or 30 kHz HSync for standard Amiga video modes. This is not compatible with most VGA monitors. A Multisync monitor is required for some higher resolutions.
The Commodore A520 RF modulator connects to the video port and outputs composite video and RF video.
See also
External links
References
- ↑ Lua error in package.lua at line 80: module 'strict' not found. 080809 titan.co.nz (originally Amiga 3000T manual)
<templatestyles src="Asbox/styles.css"></templatestyles>
 |
This video technology article is a stub. You can help Wikipedia by expanding it. |
