This is a good article. Click here for more information.

New York State Route 104

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

NYS Route 104 marker

NYS Route 104
290x172px
Map of western and central New York with NY 104 highlighted in red
Route information
Maintained by NYSDOT and the city of Niagara Falls
Length: 182.41 mi[3] (293.56 km)
Existed: c. 1972[1][2] – present
Major junctions
West end: NY 384 in Niagara Falls
  US 62 in Niagara Falls
I-190 in Lewiston
NY 78 near Lockport
NY 98 near Albion
NY 390 in Greece
NY 590 in Irondequoit
NY 14 near Sodus
NY 481 in Oswego
I-81 in Mexico
East end: NY 13 in Williamstown
Location
Counties: Niagara, Orleans, Monroe, Wayne, Cayuga, Oswego
Highway system
x20px NY 103 NY 104A

New York State Route 104 (NY 104) is a 182.41-mile (293.56 km) long east–west state highway in Upstate New York in the United States. It spans six counties and enters the vicinity of four cities—Niagara Falls, Lockport, Rochester, and Oswego—as it follows a routing largely parallel to that of the southern shoreline of Lake Ontario, along a ridge of the old shoreline of Glacial Lake Iroquois.[4] The western terminus of NY 104 is at an intersection with NY 384 in Niagara Falls, Niagara County, while its eastern terminus is at a junction with NY 13 in the town of Williamstown, Oswego County. The portion of NY 104 between Rochester and the village of Webster east of the city is a limited-access highway known as the Keeler Street Expressway west of NY 590 and the Irondequoit–Wayne County Expressway east of NY 590; from Williamson to Oswego, NY 104 is a super two highway.

The majority of Ridge Road and modern NY 104 from the village of Red Creek to the town of Mexico were originally designated as part of Route 30, an unsigned legislative route, early in the 20th century. All of Ridge Road and its continuation through Oswego to the hamlet of Maple View gained a signed designation by 1926 and became part of U.S. Route 104 (US 104), a United States Numbered Highway extending from Niagara Falls to Maple View, c. 1935. US 104, which never connected to US 4, its implied parent route, was redesignated as NY 104 c. 1972. As part of the redesignation, NY 104 was extended east to NY 13 in Williamstown over what had been New York State Route 126.

Over time, the 104 designation, whether it be US 104 or NY 104, has been shifted from surface streets to expressways and super twos, particularly from Rochester east to Oswego. The first such realignment occurred in the 1940s in Wayne County and was completed by the realignment of NY 104 onto the Irondequoit–Wayne County Expressway near Webster in the 1980s.

Route description

Niagara County

File:NY 104 at NY 384.jpg
Western terminus of NY 104 at NY 384 in Niagara Falls

NY 104 begins near the Rainbow Bridge at the intersection of First Street and Niagara Street (NY 384) in downtown Niagara Falls. The Seaway Trail crosses over NY 384 and follows NY 104 north on First Street for one block to the Robert Moses State Parkway, where the byway and NY 104 veer onto Main Street. NY 104 follows Main Street through the largely commercial west side of the city and intersects the northern or eastern terminus for both US 62 (Ferry Avenue and Walnut Avenue) and US 62 Business (Pine Avenue). North of US 62 Business, the area becomes more residential as NY 104 meets NY 182 southeast of the Whirlpool Rapids Bridge. To the north, the name of NY 104 changes to Lewiston Road as it passes by the south campus of Niagara University. Near the northern extent of the campus, NY 104 intersects the western terminus of NY 31, here named College Avenue. At the city limits, NY 104 meets the northbound Robert Moses State Parkway by way of a half-interchange.[5][6] The portion of NY 104 between Third Street and the Lewiston town line is maintained by the city of Niagara Falls, and is the only part of NY 104 that is not maintained by the New York State Department of Transportation.[7][8][9]

Now in the town of Lewiston, NY 104 comes within view of the Niagara River gorge and begins to run along its eastern rim. NY 104 meets the northernmost point of NY 61 at the northern campus of Niagara University. Past NY 61, the route passes by the Niagara Power Visitors Center and over the Robert Moses Niagara Power Plant. On the opposite side of the plant, NY 104 connects with Interstate 190 (I-190) at exit 25 via Upper Mountain Road and passes under the eastern approach to the Lewiston–Queenston Bridge, which links I-190 with Ontario's Highway 405.[5]

File:NY 104 in Newfane.jpg
NY 104 heading westward from NY 78 in Newfane

Past I-190, NY 104 begins to deviate from the Niagara River. It heads through a small neighborhood situated between the Moses Parkway and NY 104 and intersects the northern end of NY 265. North of this junction, NY 104 curves northeast to descend the Niagara Escarpment. As it heads downward in elevation, it intersects the western terminus of NY 18 by way of an interchange. As part of the same exit, NY 104 meets the parkway one more time as well as the southern terminus of NY 18F near the village of Lewiston. Here, the Seaway Trail leaves NY 104 to follow NY 18F. East of the exit, NY 104 intersects NY 18 again by way of another interchange.[5][6]

East of Lewiston village, NY 104 follows Ridge Road through a sparsely populated area of Niagara County. Much of this portion of NY 104 is bordered on its southern end by the Tuscarora Indian Reservation. At the Lewiston hamlet of Dickersonville, the extents of the reservation head south, and development along NY 104 increases slightly. NY 104 meets the northern terminus of NY 429 at the Lewiston–Cambria town line and crosses over NY 425 at Streeters Corners. Just east of this location is an intersection with NY 93 in the community of Molyneaux Corners. The two routes form a concurrency east to Warrens Corners, a hamlet situated on the Cambria–Lockport town line, where NY 93 turns south to serve the city of Lockport.[5]

NY 104 heads northeast through the extreme northwest corner of the town of Lockport to the town line, where it turns eastward to straddle the boundary between the towns of Lockport and Newfane. As it approaches the hamlet of Wrights Corners, the amount of development along NY 104 increases substantially with the level of development peaking at the junction of NY 104 and NY 78. The two routes join for roughly 0.35 miles (0.56 km) into the town of Newfane before splitting north of the hamlet. Ridge Road continues northeast through a residential district, which gives way to open fields once more at Ridgewood. NY 104 turns east here, passing through the town of Hartland and intersecting the southern terminus of NY 148 and the northern terminus of NY 271. The route crosses into Orleans County at a junction with the southern terminus of NY 269, which straddles the county line.[10]

Orleans and Monroe counties

The route heads northeast through the town of Ridgeway to the hamlet of the same name, where NY 104 meets NY 63. NY 63 joins NY 104 east along Ridge Road for about 300 yards (270 m) before continuing north toward Lake Ontario. NY 104, meanwhile, continues through the rural towns of Ridgeway and Gaines to a junction with NY 279 north of Albion. Not far to the east, NY 104 intersects NY 98, the primary north–south highway through Albion, in the hamlet of Childs.[10] Just past the intersection on the north side of the road are two of the three cobblestone buildings of the Cobblestone Historic District, a National Historic Landmark.[11]

Farther east, Ridge Road enters the town of Murray, where it meets the northern terminus of NY 387 and intersects NY 237 in the hamlet of Murray. The two routes join for just under a mile (1.6 km) before NY 237 breaks away to the south toward Holley. NY 104 exits Orleans County 2 miles (3.2 km) later in the same fashion as it entered: by intersecting a state highway. After meeting the southern terminus of NY 272, NY 104 crosses into Monroe County and becomes West Ridge Road as it heads through the town of Clarkson. In the densely populated hamlet of Clarkson Corners, NY 104 intersects NY 19. The open fields return east of the hamlet, and largely surround Ridge Road as NY 104 intersects NY 260. NY 104 heads onward into Parma, where it widens to four lanes and has a junction with NY 259 in Parma Corners.[12]

File:Keelerstreet.JPG
Keeler Street Expressway (NY 104) eastbound at Hudson Avenue

East of Parma Corners, development on NY 104 steadily increases as it heads toward the town of Greece. By the Parma–Greece town line, where NY 104 intersects the southern terminus of NY 261, Ridge Road is lined with commercial properties of varying size. Continuing east, NY 104 meets the northern terminus of NY 386. Here, NY 104 widens to a six-lane divided highway. Between NY 386 and NY 390 exit 24, NY 104 passes by several large shopping malls, the largest of which is The Mall at Greece Ridge at the intersection of NY 104 and Long Pond Road. At NY 390, NY 104 continues to be a six-lane divided highway as it heads toward Rochester. It enters the city limits upon meeting Mount Read Boulevard at an interchange.[13]

In Rochester, NY 104 passes through an area known as Kodak Park, the large industrial complex owned by Eastman Kodak that occupies an entire neighborhood. In the middle of the complex, NY 104 crosses the Rochester and Southern Railroad and the CSX Transportation-owned Charlotte Running Track and intersects the eastern terminus of NY 18. Continuing east, NY 104 crosses the Genesee River gorge on the Veterans Memorial Bridge. On the opposite bank, it loses the name West Ridge Road and becomes a limited-access highway known as the Keeler Street Expressway.[13]

File:Irondequoit Bay Bridge.jpg
The Irondequoit Bay Bridge carries NY 104 from Irondequoit to Webster.

North of the first exit with St. Paul Street, Ridge Road resurfaces as East Ridge Road, which parallels the expressway to the north. NY 104 continues through Rochester and Irondequoit, connecting to North Clinton Avenue, Seneca Avenue, Hudson Avenue, Carter Street, Portland Avenue, North Goodman Street and Culver Road by way of interchanges. Between the Goodman Street and Culver Road exits, NY 104 passes the former Medley Centre. East of Culver, NY 104 encounters NY 590 and connects to NY 590 southbound by way of an interchange. East Ridge Road runs through the middle of this interchange, although there are no connections between Ridge and NY 104. There is also no access from NY 104 eastbound to NY 590 northbound; eastbound traffic must take Culver Road in order to go north toward Sea Breeze. Just east of the NY 590 interchange, NY 104 becomes the Irondequoit–Wayne County Expressway and crosses the Irondequoit Bay by way of the Irondequoit Bay Bridge. An access road between NY 104 just west of the bridge and NY 590 at Titus Avenue was once planned. Although entrance and exit ramps were built for the connection along NY 104, the rest of the link was never built, leaving no access from NY 104 westbound to NY 590 northbound and from NY 590 southbound to NY 104 eastbound.[13]

On the other side of the bridge in the town of Webster, NY 104 has exits leading to Bay Road, Five Mile Line Road, Hard Road, and Holt Road prior to entering the village of Webster. Within the village, NY 104 meets NY 250 (North Avenue) and Phillips Road by way of interchanges before exiting the village. The expressway loosely parallels the southern edge of the primary Xerox campus to an exit with Salt Road, where it downgrades to a divided highway as it continues east to Basket Road and the Monroe–Wayne county line, partially delimited by NY 404.[13]

Wayne and Cayuga counties

As Ridge Road follows to the south, NY 104 continues east through Ontario, where it meets the northern terminus of NY 350 in Ontario Center. The four-lane divided highway continues east to Williamson, where the median separating the two directions of NY 104 comes to an end west of the hamlet of Williamson. In the center of the hamlet, NY 104 intersects the northern terminus of NY 21. NY 104 narrows to two lanes east of Williamson as development along the route declines once more, giving way to open fields and thick forests.[14]

File:NY 104 at NY 21 north terminus.jpg
NY 104 at the northern terminus of NY 21 in Williamson

Near the center of the county in the town of Sodus, NY 104 serves as the northern terminus of NY 88 northwest of the village of Sodus. While NY 88 heads east into the village, NY 104 bypasses Sodus to the north. East of the village, Ridge Road and NY 104 intersect as Ridge Road flips to the north side of NY 104. The two highways follow parallel routings southeast toward Alton, where NY 104 intersects NY 14. East of Alton, the gap between the two widens as Ridge Road veers north to access Sodus Bay. NY 104, meanwhile, follows a nearly linear routing into the town of Huron, where it intersects the northern terminus of NY 414.[14]

NY 104 continues on the eastward routing to the vicinity of the village of Wolcott, where it connects to the northern terminus of NY 89 via a half-diamond interchange south of the village. Northeast of this location in the town of Wolcott, Ridge Road intersects NY 104 once again, returning to the south side of the route. The two roads follow parallel routings once more to a junction south of Red Creek. At this rural intersection, NY 104 acts as the southern and northern (western) terminus of both NY 104A and NY 370, respectively, both occupying an extension of Ridge Road. Just east of the intersection is the Wayne–Cayuga county line. Only 7 miles (11 km) of the route are situated in Cayuga County, and the only junction of note within the county is with NY 38, which it meets in the Sterling hamlet of Martville. East of the junction, NY 104 turns sharply to the northeast and enters Oswego County.[14]

Oswego County

The route continues northeast through the town of Hannibal to the village of the same name. Instead of entering the community, NY 104 bypasses it to the east. It intersects NY 3 east of Hannibal and heads north toward Lake Ontario. In the town of Oswego, NY 104 meets the northern terminus of NY 104A and assumes its northeasterly routing. It is here that the Seaway Trail rejoins NY 104. NY 104 heads along the Lake Ontario shoreline to the lake-side city of Oswego, the first location with significant development along the route since Williamson. The route intersects Sweet Road, a connector leading to the campus of SUNY Oswego, just west of the city limits.[6][14]

File:OldUS104ShieldOswego.jpg
An old "To US 104" shield on Lake Street in Oswego.

NY 104 enters the city as the two-laned West Seneca Street. At Baylis Street, the road widens to four lanes separated by a median. After seven blocks, NY 104 veers onto West Bridge Street, a four-lane street with no median. NY 104 continues along Bridge Street into downtown, where it intersects the northern terminus of NY 48 on the west bank of the Oswego River and the northern terminus of NY 481 on the east bank. As NY 104 heads through eastern Oswego, it separates from East Bridge Street and curves east to follow a more inland routing. The route reverts to two lanes as it exits the city limits.[15]

The high level of development along NY 104 continues to the Scriba hamlet of the same name, where it begins to become more sporadic and give way to fields and dense forests. NY 104 heads northeast to New Haven and the western terminus of NY 104B. While NY 104B heads northeast toward the lake shore as part of the Seaway Trail, NY 104 cuts southeast to serve the village of Mexico. In the village center, NY 104 briefly overlaps NY 3 and intersects the western terminus of NY 69. The route continues due east through the rural town of Mexico to the small hamlet of Maple View, centered around the junction between NY 104 and US 11. Just outside the hamlet, NY 104 meets I-81 at exit 34. Past I-81, NY 104 heads east and southeast for nine miles (14 km) through the predominantly rural towns of Albion and Williamstown to its eastern terminus at a junction with NY 13.[6][15]

History

Early designations

U.S. Route 104 shield
NY 104 was US 104 from the mid-1930s to the early 1970s.

In 1908, the New York State Legislature established Route 30, an unsigned legislative route extending from Niagara Falls, Niagara County in the southwest to Rouses Point, Clinton County, in the northeast. From Rochester to Red Creek, Route 30 was assigned to Ridge Road. Between Red Creek and the hamlet of Union Square (now Maple View) in the town of Mexico, it included most of modern NY 104. At the same time, the roadway alongside the Niagara River between Ridge Road in Lewiston and Pine Avenue in downtown Niagara Falls was designated, but not signed, as part of Route 18.[16][17] By 1914, Route 30 was amended to also include the section of Ridge Road from Porter (modern NY 429) to Ridgeway (NY 63).[16][17][18] In 1914,[18][19] another section—from Ridgeway to the OrleansMonroe county line—was also included in Route 30's definition as a spur route.[16][17] The spur route became part of Route 30 on March 1, 1921, when the mainline route was realigned to follow Ridge Road between Ridgeway and Rochester.[20]

When the first set of posted routes in New York were assigned in 1924, the segments of Route 30 from Rochester to Red Creek and from Oswego to Maple View became part of NY 3. Between Red Creek and Oswego, NY 3 was routed on what is now NY 104A. Farther west, the portion of Route 18 from Niagara Falls to Lewiston was included as part of NY 34.[21] By 1926, all of legislative Route 30 west of Rochester was designated as part of NY 31.[22] In the late 1920s, however, NY 31 was realigned to follow Ridge Road west from Porter to Lewiston.[23][24] In the 1930 renumbering of state highways in New York, NY 34 became part of an extended NY 18 while NY 3E was assigned to the portion of former legislative Route 30 between Red Creek and Oswego.[25][26] NY 3E was renumbered to NY 3F c. 1932.[27][28]

Establishment of US 104

File:Old US 104 shield in Niagara Falls.jpg
Sign assembly for US 62 and US 104 in Niagara Falls. US 104 had long since been redesignated as NY 104 by the time of this photo.

US 104 was assigned across Upstate New York in April 1935, extending from Niagara Falls to Maple View via Lewiston, Rochester, and Oswego. It overlapped NY 18 from Niagara Falls to Lewiston and replaced NY 3 and NY 31 from Lewiston to Maple View (except from Red Creek to Oswego, where US 104 followed NY 3F instead). As a result, NY 31 was shifted south onto most of its modern alignment while NY 3 was rerouted south of Watertown to follow what had been NY 3D. Although US 104 was technically a child route of US 4, it did not connect to US 4.[29] A highway extending eastward from US 11 and US 104 at Maple View to NY 13 in Williamstown was designated as NY 126 c. 1940.[30][31]

When it was first assigned, US 104 dipped south to serve downtown Rochester instead of bypassing it to the north. US 104 left Ridge Road at Lake Avenue and followed Lake Avenue and State Street south to Main Street in downtown. It followed Main Street and Winton Road to Empire Boulevard, where it turned east to rejoin Ridge Road in Webster.[32] It was rerouted c. 1937 to continue east on Ridge Road over the Veterans Memorial Bridge and through Irondequoit to Culver Road. US 104 turned here, following Culver Road south to Empire Boulevard and the latter east to Winton Road, where it reconnected to its original routing through the city. The realignment created a significant overlap with NY 18, which joined US 104 in the vicinity of Kodak Park and separated at Culver Road, where it headed north instead.[33][34]

Conversion to expressways

Work began in the 1940s on new super two alignments for US 104 in Wayne, Cayuga, and Oswego counties. The new highway was built on a routing parallel to that of Ridge Road and served as a bypass of the communities along Ridge Road. The first portion of the super two, extending from the Monroe–Wayne county line at Union Hill to west of Sodus, was built in the mid-1940s and completed by 1947.[35][36] An extension of the highway around Sodus to NY 414 in Huron was constructed in the mid-1960s and opened by 1968. In between the end of the super two and Ridge Road, US 104 was routed on Lake Bluff Road.[37][38] The remainder of the super two between Huron and Red Creek was finished by 1974.[39] East of the super two, a bypass was constructed around the village of Hannibal during the early 1960s and opened to traffic by 1964.[37][40]

File:Culver Rd near NY 104.jpg
Northbound on Culver Road (former US 104) in Irondequoit just north of NY 104

Similar conversion projects were also conducted elsewhere. In Irondequoit, the portion of the Sea Breeze Expressway (now NY 590) from Empire Boulevard to Culver Road opened in the late 1950s. US 104 and NY 18 were extended eastward along East Ridge Road to meet the expressway at what is now exit 11. Both designations entered the freeway; however, NY 18 followed the roadway north to Culver Road while US 104 progressed south to Empire Boulevard, where it rejoined its former surface alignment towards Webster.[41][42] The 0.71 miles (1.14 km) of Empire Boulevard between the Rochester city line and the Sea Breeze Expressway remains state-maintained to this day as NY 941B, an unsigned reference route.[3]

In the mid-1960s, construction began on the Keeler Street Expressway, a limited-access highway extending across Irondequoit from the Genesee River (at the Veterans Memorial Bridge) to the Sea Breeze Expressway. The first section from North Goodman Street to the Sea Breeze Expressway was completed by 1968[37][38] while the remainder opened in late 1969.[38][43] The name of the expressway was derived from Keeler Street, a small residential street that originally connected to East Ridge Road and St. Paul Street by way of a traffic circle on the east bank of the Genesee River. The street was turned into a dead-end street as a result of the expressway's construction.[44][45] US 104 was moved from East Ridge Road to the expressway, which remains known, albeit infrequently, as the Keeler Street Expressway to this day. NY 18 remained on East Ridge Road, however, reducing the overlap between US 104 and NY 18 to just the portion on the Veterans Bridge.[46] NY 18 was truncated to its current eastern terminus c. 1973, eliminating the overlap entirely.[47][48]

File:Reference marker for NY 104 on NY 404.jpg
Reference marker for NY 104 on NY 404 in Webster. NY 404 is the former alignment of NY 104 through eastern Monroe County.

The first segment of an eastward extension of the Keeler Street Expressway, named the Irondequoit–Wayne County Expressway, opened c. 1971 between the Sea Breeze Expressway (at this point designated as part of NY 47) and Five Mile Line Road. In between, US 104 crossed Irondequoit Bay by way of the Irondequoit Bay Bridge.[46][49] US 104's former surface alignment between NY 47 and Five Mile Line Road was redesignated NY 404[46][50] while US 104 was temporarily realigned onto Five Mile Line Road between the expressway and Ridge Road to connect to its former alignment.[51]

Redesignation and completion

The segment of I-81 through central New York was built on an alignment that closely paralleled US 11 from the Pennsylvania state line northward to the city of Watertown. The portion of I-81 near Maple View was completed in late 1961,[52] at which time US 104 was extended 1 mile (1.6 km) eastward over NY 126 to meet the new highway. NY 126 was truncated on its west end to the I-81 interchange as a result.[53] US 104 was redesignated as NY 104 c. 1972,[1][2] making the route the third to bear the NY 104 designation. As part of the change, NY 104 was extended east to NY 13, completely supplanting NY 126.[48][54]

By 1978, the frontage roads between Five Mile Line Road and NY 250 in Webster were completed. NY 104 was rerouted eastward along the roadways while NY 404 was extended over NY 104's old alignment to NY 250 in Webster.[51] The section from NY 250 to the existing expressway at the Wayne County line was built in the late 1970s[55][56] while the main carriageway of NY 104 between Five Mile Line Road and NY 250 was completed in the early 1980s. NY 404 was extended east along the former alignment of NY 104 to the county line upon the total completion of the Five Mile Line Road–NY 250 segment.[57][58]

Suffixed routes

NY 104 has two suffixed routes, both of which were assigned c. 1935.[29]

NY 104 Truck


NYS Route 104 Truck
Location: RochesterIrondequoit

New York State Route 104 Truck is a 1.3-mile (2.1 km) long truck route of NY 104 through the city of Rochester and town of Irondequoit in Monroe County. The route, which exists in the eastbound direction only, extends from the ramps connecting NY 104 to St. Paul Street east along East Ridge Road to Hudson Avenue, where it turns south to access NY 104.[45] A 0.9-mile (1.4 km) long segment of NY 104 Truck follows the former alignment of US 104 east along East Ridge Road from St. Paul Street to Hudson Avenue.[38][45]

Major intersections

County Location mi[3] km Destinations Notes
Niagara Niagara Falls 0.00 0.00 NY 384 (Niagara Street)
0.16 0.26 US 62 south (Ferry Avenue)
0.35 0.56 US 62 north (Walnut Avenue) Northern terminus of US 62
0.51 0.82
US 62 Bus. (Pine Avenue)
Western terminus of US 62 Business
1.42 2.29 NY 182 (Cleveland Avenue)
2.51 4.04 NY 31 (College Avenue) Western terminus of NY 31
3.33 5.36 Robert Moses Parkway
Town of Lewiston 3.69 5.94 NY 61 (Hyde Park Boulevard) Northern terminus of NY 61
4.88 7.85 I-190 Exit 25 (I-190)
5.41 8.71 NY 265 (Military Road) Northern terminus of NY 265
5.95 9.58 NY 18 Western terminus of NY 18
6.49 10.44 NY 18F / Robert Moses Parkway Southern terminus of NY 18F
7.17 11.54 NY 18
Porter 14.24 22.92 NY 429 Hamlet of Ransomville; northern terminus of NY 429
Cambria 17.28 27.81 NY 425 Hamlet of Streeters Corners
18.85 30.34 NY 93 west Hamlet of Molyneaux Corners; western terminus of NY 93 / NY 104 overlap
21.12 33.99 NY 93 east Hamlet of Warren Corners; eastern terminus of NY 93 / NY 104 overlap
LockportNewfane
town line
25.10 40.39 NY 78 south Hamlet of Wrights Corners; southern terminus of NY 78 / NY 104 overlap
Newfane 25.41 40.89 NY 78 north Hamlet of Wrights Corners; northern terminus of NY 78 / NY 104 overlap
Hartland 33.07 53.22 NY 148 Southern terminus of NY 148
37.06 59.64 NY 271 Northern terminus of NY 271
NiagaraOrleans
county line
Hartland–Ridgeway
town line
37.60 60.51 NY 269 Southern terminus of NY 269
Orleans Ridgeway 41.34 66.53 NY 63 south Western terminus of NY 63 / NY 104 overlap
41.50 66.79 NY 63 north Eastern terminus of NY 63 / NY 104 overlap
Gaines 50.64 81.50 NY 279 Hamlet of Gaines
51.84 83.43 NY 98 Hamlet of Childs
Murray 56.99 91.72 NY 387 Northern terminus of NY 387
59.45 95.68 NY 237 north Western terminus of NY 104 / NY 237 overlap
60.32 97.08 NY 237 south Eastern terminus of NY 104 / NY 237 overlap
OrleansMonroe
county line
Murray–Clarkson
town line
62.30 100.26 NY 272 Southern terminus of NY 272
Monroe Clarkson 66.11 106.39 NY 19
68.09 109.58 NY 260
Parma 73.08 117.61 NY 259 Hamlet of Parma Corners
Town of Greece 75.11 120.88 NY 261 (Manitou Road) Southern terminus of NY 261
76.28 122.76 NY 386 (Elmgrove Road) Northern terminus of NY 386
79.16 127.40 NY 390 Exit 24 (NY 390)
Rochester 81.02 130.39 NY 18 (Dewey Avenue) Eastern terminus of NY 18
West end of freeway section
81.91 131.82 Maplewood Drive
82.27 132.40 St. Paul Street Serves Seneca Park Zoo; eastbound exit and westbound entrance
82.69 133.08 North Clinton Avenue / Seneca Avenue Serves Seneca Park Zoo; western terminus of frontage roads
83.35 134.14 Hudson Avenue Eastbound exit only
83.74 134.77 Carter Street / Portland Avenue (east) / Hudson Avenue (west)
Irondequoit 84.40 135.83 Goodman Street / Portland Avenue (west) Serves Rochester General Hospital; eastern terminus of frontage roads
85.33 137.33 Culver Road (Seaway Trail)
85.91 138.26 NY 590 south – Rochester
Irondequoit–Webster Irondequoit Bay Bridge
Webster 88.24 142.01 Bay Road
90.28 145.29 Five Mile Line Road Western terminus of frontage roads
90.98 146.42 Hard Road / Holt Road Eastbound exit and entrance
91.87 147.85 Hard Road / Holt Road Westbound exit and entrance
Village of Webster 92.57 148.98 NY 250 – Webster Eastern terminus of frontage roads
93.15 149.91 Phillips Road Serves Xerox Wilson Center; eastbound exit and westbound entrance
Webster 94.12 151.47 Salt Road
East end of freeway section
MonroeWayne
county line
Webster–Ontario
town line
95.43 153.58 NY 404 (County Line Road) Eastern terminus of NY 404
Wayne Ontario 98.92 159.20 NY 350 (Ontario Center Road) Hamlet of Ontario Center; northern terminus of NY 350
Williamson 104.97 168.93 NY 21 (Lake Avenue) Northern terminus of NY 21
Sodus 110.49 177.82 NY 88 Northern terminus of NY 88
116.28 187.13 NY 14 Hamlet of Alton
Huron 120.35 193.68 NY 414 Northern terminus of NY 414
Town of Wolcott 125.56 202.07 NY 89 Interchange; northern terminus of NY 89
129.72 208.76 NY 104A / NY 370 Western terminus of NY 104A and NY 370
Cayuga Sterling 134.85 217.02 NY 38 Hamlet of North Victory
Oswego Village of Hannibal 139.84 225.05 NY 34 Northern terminus of NY 34
141.30 227.40 NY 3
Town of Oswego 147.31 237.07 NY 104A Hamlet of Southwest Oswego; eastern terminus of NY 104A
Oswego 152.12 244.81 NY 48 (West Fifth Street) Northern terminus of NY 48
152.53 245.47 NY 481 (East First Street) Northern terminus of NY 481
New Haven 161.67 260.18 NY 104B Western terminus of NY 104B
Village of Mexico 166.72 268.31 NY 3 west Western terminus of NY 3 / NY 104 overlap
166.96 268.70 NY 3 east Eastern terminus of NY 3 / NY 104 overlap
167.10 268.92 NY 69 Western terminus of NY 69
Mexico 171.38 275.81 US 11
172.53 277.66 I-81 Exit 34 (I-81)
Williamstown 182.41 293.56 NY 13
1.000 mi = 1.609 km; 1.000 km = 0.621 mi

See also

Former alignments

References

  1. 1.0 1.1 Lua error in package.lua at line 80: module 'strict' not found.
  2. 2.0 2.1 Lua error in package.lua at line 80: module 'strict' not found.
  3. 3.0 3.1 3.2 3.3 3.4 Lua error in package.lua at line 80: module 'strict' not found.
  4. Lua error in package.lua at line 80: module 'strict' not found.
  5. 5.0 5.1 5.2 5.3  Template:Yahoo maps is deprecated.›Lua error in package.lua at line 80: module 'strict' not found.[dead link]
  6. 6.0 6.1 6.2 6.3 Lua error in package.lua at line 80: module 'strict' not found. The driving directions option was selected and used to determine the Seaway Trail's routing.
  7. Lua error in package.lua at line 80: module 'strict' not found.
  8. Lua error in package.lua at line 80: module 'strict' not found.
  9. Lua error in package.lua at line 80: module 'strict' not found.
  10. 10.0 10.1 Lua error in package.lua at line 80: module 'strict' not found.
  11. Lua error in package.lua at line 80: module 'strict' not found.
  12. Lua error in package.lua at line 80: module 'strict' not found.
  13. 13.0 13.1 13.2 13.3 Lua error in package.lua at line 80: module 'strict' not found.
  14. 14.0 14.1 14.2 14.3 Lua error in package.lua at line 80: module 'strict' not found.
  15. 15.0 15.1 Lua error in package.lua at line 80: module 'strict' not found.
  16. 16.0 16.1 16.2 Lua error in package.lua at line 80: module 'strict' not found.
  17. 17.0 17.1 17.2 Lua error in package.lua at line 80: module 'strict' not found.
  18. 18.0 18.1 Lua error in package.lua at line 80: module 'strict' not found.
  19. Lua error in package.lua at line 80: module 'strict' not found.
  20. Lua error in package.lua at line 80: module 'strict' not found.
  21. Lua error in package.lua at line 80: module 'strict' not found.
  22. Lua error in package.lua at line 80: module 'strict' not found.
  23. Lua error in package.lua at line 80: module 'strict' not found.
  24. Lua error in package.lua at line 80: module 'strict' not found.
  25. Lua error in package.lua at line 80: module 'strict' not found.
  26. Lua error in package.lua at line 80: module 'strict' not found.
  27. Lua error in package.lua at line 80: module 'strict' not found.
  28. Lua error in package.lua at line 80: module 'strict' not found.
  29. 29.0 29.1 Lua error in package.lua at line 80: module 'strict' not found. open access publication - free to read
  30. Lua error in package.lua at line 80: module 'strict' not found.
  31. Lua error in package.lua at line 80: module 'strict' not found.
  32. Lua error in package.lua at line 80: module 'strict' not found.
  33. Lua error in package.lua at line 80: module 'strict' not found.
  34. Lua error in package.lua at line 80: module 'strict' not found.
  35. Lua error in package.lua at line 80: module 'strict' not found.
  36. Lua error in package.lua at line 80: module 'strict' not found.
  37. 37.0 37.1 37.2 Lua error in package.lua at line 80: module 'strict' not found.
  38. 38.0 38.1 38.2 38.3 Lua error in package.lua at line 80: module 'strict' not found.
  39. Lua error in package.lua at line 80: module 'strict' not found.
  40. Lua error in package.lua at line 80: module 'strict' not found.
  41. Lua error in package.lua at line 80: module 'strict' not found.
  42. Lua error in package.lua at line 80: module 'strict' not found.
  43. Lua error in package.lua at line 80: module 'strict' not found.
  44. Lua error in package.lua at line 80: module 'strict' not found.
  45. 45.0 45.1 45.2 Lua error in package.lua at line 80: module 'strict' not found. The Street View feature was used to determine the routing of NY 104 Truck.
  46. 46.0 46.1 46.2 Lua error in package.lua at line 80: module 'strict' not found.
  47. Lua error in package.lua at line 80: module 'strict' not found.
  48. 48.0 48.1 Lua error in package.lua at line 80: module 'strict' not found.
  49. Lua error in package.lua at line 80: module 'strict' not found.
  50. Lua error in package.lua at line 80: module 'strict' not found.
  51. 51.0 51.1 Lua error in package.lua at line 80: module 'strict' not found.
  52. Lua error in package.lua at line 80: module 'strict' not found.
  53. Lua error in package.lua at line 80: module 'strict' not found.
  54. Lua error in package.lua at line 80: module 'strict' not found.
  55. Lua error in package.lua at line 80: module 'strict' not found.
  56. Lua error in package.lua at line 80: module 'strict' not found.
  57. Lua error in package.lua at line 80: module 'strict' not found.
  58. Lua error in package.lua at line 80: module 'strict' not found.

External links

Script error: No such module "Attached KML".