Table (parliamentary procedure)
Look up table in Wiktionary, the free dictionary. |
In parliamentary procedure, the use of table, as a verb, has two different and contradictory meanings:
- In the United States, to "table" usually means to postpone or suspend consideration of a pending motion.
- In the rest of the English-speaking world, such as in the United Kingdom, to "table" means to begin consideration (or reconsideration) of a proposal.
Motions which use the word "table" have specific meanings and functions, depending on the parliamentary authority used. The meaning of "table" also depends on the context in which it is used.
Contents
Difference between American and British usage
Both the American and the British dialects have the sense of "to table" as "to lay (the topic) on the table", or "to cause (the topic) to lie on the table". A related phrase "put on the table" has the same meaning for both dialects, which is to make the issue available for debate.[1][2][3] The difference is when "table" is used as a verb.[1]
The British meaning of to "table" is to begin consideration of a proposal.[1] This comes from the use of the term to describe physically laying legislation on the table in the British Parliament; once an item on the order paper has been laid on the table, it becomes the current subject for debate.[4]
The American meaning of to "table" is to postpone or suspend consideration of a motion.[1] In this meaning, to begin consideration of the topic again, it would have to be "taken from the table". The use of terms such as "tabling a motion" in connection with setting aside or killing a main motion can cause confusion with the usage of this term in the United Kingdom and Commonwealth countries, where it has an opposite meaning—that is, to propose a motion for consideration.[5][6] To make the intent clear internationally, Congressional Quarterly and its associated CQ publications, in reporting congressional votes, usually follow the word "table" (as used in Congress) with the word "kill" in parentheses.[7][8]
Use in the United States
In the United States, use of "table" as a verb usually refers to the motion to "lay on the table". Different parliamentary authorities describe such a motion in different ways. It also depends on whether the assembly is an organization or a legislative body.
Organizations
Robert's Rules of Order Newly Revised (RONR)
Class | Subsidiary motion |
---|---|
In order when another has the floor? | No |
Requires second? | Yes |
Debatable? | No |
May be reconsidered? | Negative vote only |
Amendable? | No |
Vote required | Majority |
Under Robert's Rules of Order Newly Revised (the book used by most organizations), the subsidiary motion to lay on the table is properly used only when it is necessary to suspend consideration of a main motion in order to deal with another matter that has come up unexpectedly and which must be dealt with before the pending motion can be properly addressed.[9] It has, however, become common to misuse this motion to end consideration of the pending main motion without debate, or to mistakenly assume that its adoption prevents further consideration of the main motion at all, or until a specified time.[10][11] Using "table" as a verb usually indicates misuse of this motion.[12] The book states, "It is preferable to avoid moving 'to table' a motion, or 'that the motion be tabled.'"[12]
Class | Motion that brings a question again before the assembly |
---|---|
In order when another has the floor? | No |
Requires second? | Yes |
Debatable? | No |
May be reconsidered? | No |
Amendable? | No |
Vote required | Majority |
A main motion that has been laid on the table may be taken up again by adoption of a motion to take from the table.[13] A motion can be taken from the table at the same session (or meeting) or at the next session (or meeting) if that session occurs within a quarterly time interval.[14] Otherwise, the motion dies.[14]
The use of the motion to lay on the table to kill a motion is improper; instead, a motion to postpone indefinitely should be used.[11] Similarly, it is improper to use the motion to lay on the table to postpone something; a motion to postpone to a certain time should be used in this case.[10] If debate is not desired, a motion to close debate (the previous question) should be used.[11] One of the disadvantages of trying to kill a measure by laying it on the table is that, if some opponents of the measure subsequently leave the meeting, a temporary majority favoring the measure can then take it from the table and act on it; or they may do so at the next session if held within a quarterly time interval.[15]
Although the motion to lay on the table is not debatable, the chair can ask the maker of the motion to state his reason in order to establish the urgency and legitimate intent of the motion or the maker can state it on his own initiative.[16]
The Standard Code of Parliamentary Procedure (TSC)
The Standard Code of Parliamentary Procedure has a motion to table. It can temporarily set aside a main motion (in which case it is also called the motion to postpone temporarily, a motion not in RONR) or it can kill the main motion without a direct vote or further debate.[17] TSC uses the short form, "table", which is discouraged by RONR.[12][17] If the motion to table is used in circumstances suggesting that the purpose is to kill the main motion, a two-thirds vote should be required.[17]
In TSC, the motion to take from the table must be made prior to the end of the current session, unlike RONR, which permits the motion to be made prior to the end of the following session if it is held within a quarterly time interval. The preferred name of the motion to take from the table, under TSC, is the motion to resume consideration.
Demeter's Manual of Parliamentary Law and Procedure
Demeter's Manual of Parliamentary Law and Procedure generally follows the model of TSC where the motion may be used to delay consideration of a main motion or to kill a motion without direct vote.[18] This book also differs from RONR in that it allows the verbiage "to table". It ranks as the highest subsidiary motion and is not debatable, amendable, or eligible for reconsideration. Generally speaking, Demeter's allows all motions to be tabled except subsidiary motions, privileged motions, appeals of any kind, and motions concerning nominations or polls.[19]
Legislative bodies
Congress
In both houses of the United States Congress, the motion to table is used to kill a motion without debate or a vote on the merits of the resolution.[20] The rules do not provide for taking the motion from the table, and therefore consideration of the motion may be resumed only by a two-thirds vote to suspend the rules.[21]
Mason's Manual of Legislative Procedure
Most state legislatures use Mason's Manual of Legislative Procedure. In this book, the motions to lay on the table and to take from the table have the same characteristics as under RONR.[22] Mason's Manual has another motion, take from the desk, which a member uses when they desire to take up a matter that is on the desk, but on which no action has yet been taken.[23] The differences between the two motions are that the motion to take from the table is used after an item has been placed on the desk by a previous use of a motion to lay on the table and the motion is given a preference over new main motions offered at the same time. Take from the desk is used when an item is taken up that has not yet been introduced and this motion has no preference over new main motions that may be made at the same time.[23]
Example of Anglo‐American confusion
In the Parliament of the United Kingdom and other parliaments based on the Westminster system, to "table" a measure means to propose it for consideration, as in bringing it to the table.[4][5][6] In his book (The Second World War, Volume III, The Grand Alliance), Winston Churchill relates the confusion that arose between American and British military leaders during the Second World War:[24]
<templatestyles src="Template:Blockquote/styles.css" />
The enjoyment of a common language was of course a supreme advantage in all British and American discussions. The delays and often partial misunderstandings which occur when interpreters are used were avoided. There were however differences of expression, which in the early days led to an amusing incident. The British Staff prepared a paper which they wished to raise as a matter of urgency, and informed their American colleagues that they wished to "table it." To the American Staff "tabling" a paper meant putting it away in a drawer and forgetting it. A long and even acrimonious argument ensued before both parties realized that they were agreed on the merits and wanted the same thing.
Use in Canada
The Canadian meaning of to "table" in a parliamentary context is the British meaning to begin consideration of a proposal.[25] In a non-parliamentary context both the British and the American meanings of to "table" are used: to prevent confusion over the contradictory meanings the Canadian Oxford Dictionary recommends using a different verb altogether in non-parliamentary contexts.[26]
See also
- "Table (verb)" in List of words having different meanings in British and American English: M–Z#T
- Previous question - a motion that also has different meanings in British and American use
References
- ↑ 1.0 1.1 1.2 1.3 See dictionary definitions at Cambridge, Collins, Merriam-Webster, Oxford, and thefreedictionary.com.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 4.0 4.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 5.0 5.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 6.0 6.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 10.0 10.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 11.0 11.1 11.2 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 12.0 12.1 12.2 Robert 2011, p. 217 footnote: "In the United States, the word "table" used as a verb often suggests the improper application of the motion to Lay on the Table..."
- ↑ Robert 2011, p. 300
- ↑ 14.0 14.1 Robert 2011, p. 302
- ↑ Robert 2011, p. 216
- ↑ Robert 2011, pp. 211-212
- ↑ 17.0 17.1 17.2 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Demeter, George (1969). Demeter's Manual of Parliamentary Law and Procedure, Blue Book ed., p. 98
- ↑ Demeter, George (1969). Demeter's Manual of Parliamentary Law and Procedure, Blue Book ed., p. 101-102
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Robert 2011, p. 215, footnote. This usage of the motion to table is necessary under the heavy workload of Congress but is inappropriate in ordinary deliberative assemblies.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 23.0 23.1 Mason 2010, p. 327
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.